Home » New Products » Waste Water Treatment Electrolysis Rectifier EDI with Automatic Polarity Reversal Communication » dc rectifier for electroplating
Product List
Rectifier
  • Pulse Electroplating Power Supply
  • This pulse power supply adopts IGBT switch rectifier, PWM chopper technology, DSP microcomputer digital control technology and touch ...
  • SCR Anodizing Power Supply
  • This SCR anodizing power supply adopts thyristor rectifier technology, PLC, DSP microcomputer digital control technology and touch...

dc rectifier for electroplating

dc power supply for anodizing

electrocoagulation rectifier

  • 125V 150A PLC Control Anodizing Power Supply Air Cooling IGBT Rectifier
  • Input Voltage: 415V Phase: 3 Phase Control Way: PLC Control Cooling: Forced Air Cooling Size: 715*485*860mm Weight: 80kg Accuracy: CC CV +-1% Output Voltage: DC 0~125V Adjustable Output Current: DC 0~150A Adjustable 125V 150A PLC Control Anodizing Power Supply Air Cooling IGBT Rectifier  125V 150A DC anodizing PLC control air cooling igbt rectifier is widely used in aviation,
  • 12v Dc Battery Charging Power Supply
  • R&D for 20 yearsTop level technologySelf manufacturedStrict quality control50 rectifiers for one order1. Application15v acdc switching power supply is aplied to:Electrochemistry: Plating, anodizing, electro polishing, electrolysis, electro winning, electro refining, electronic cleaning, tinning, pickling, surface coloring, cathod protectionHeating: Inductive heating, DC heating, single phase AC heatingWater treatment: Waste water treatment, seawater desalinationBattery charging: Battery charging   2. Product basic introductionThis rectifier is suitable for batt
  • Forced Air Cooling Dc Power Supply Rectifier For Electroplating Three Phase
  • Input Voltage: 220v /380v/415v/450v Phase: 3 Phase Type: AC To DC Control: Remote Control Cooling: Forced Air Cooling Size: 665*490*270mm Weight: 40kg Time Control: Ampere Hour Meter 230v ac 24v dc electroplating rectifier with ampere hour meter  230v ac 24v dc electroplating rectifier with ampere hour meter is a new type electro plating machine plating rectifier – high frequency switching power
  • IGBT Rectifiers For Galvanic
  • TECHNICAL SPECIFICATIONS• Power supply: three-phase 220V/380V/440Vac +/- 10% 50/60 Hz.• Output voltage: 12V.• Output current: 2000A.• Regulation range: from 2 to 100% of output voltage or current.• Voltage ripple: less than 5% over whole regulation range.• Efficiency: ≥93% depending on load factor.• Protection: against short-circuits, phase loss, overtemperature, overvoltage.• Cooling: forced air.• Max. room temperature: 40°C.• Max. humidity: 80%.ADVANTAGES:1. Lower energy consumption.2. Greater penetration.3. IGBT module design.4. Output waveform quality remains CONSTANT even as voltage/c
  • Water Cooling Electroplating Power Supply , Hard Chrome Plating Rectifier 18V 8000A
  • Application: Electroplating Efficiency: >85% Control Way: Remote Control Cooling Way: Water Cooling Color: Grey And Black Type: AC To DC 18V 8000A water cooling hard chrome electroplating power supply 18V 8000A water cooling hard chrome electroplating power supply is used to electroplating.Light weight and small size compareed with SCR rectifier. There is only one regulator to change volt and current. Customer can adjust volt and current via switch CC
  • 12V 1000A switch mode electroplating power supply
  • Application: Electroplating Efficiency: >85% Control Way: Remote Control Cooling Way: Air Cooling Color: Grey Or Black Type: AC To DC 6V 600A high frequency switch mode plating rectifier power supply6V 600A high frequency switch mode plating rectifier power supply is used to electroplate. But not only for chrome electroplating, but other many applications. Such as zinc, nickel,copper and so on. Some inner part showed followed, just diffierent
  • UL CE CSA 30A 100V DC Power Supplies For Plating Easy Operation
  • 30A 100V DC Power Supplies for Plating Easy Operation1.Main technical data1. AC Input1.1Input AC power AC220V+/-10%, single phase, 50Hz2. DC Output2.1Rated Output30A 100V2.2Output mode and rangeConstant Current, 0-100% of rated valueConstant Voltage, 0-100% of rated value2.3Duty100% full load2.4Accuracy<1%3. Electrical Features3.1ApplicationElectroplating3.2Regulation modeIGBT PWM3.3ControlLocal touch panel control, no remote control3.4Power Factor(Full load)≥0.933.5Cooling Method (specify altiude if air cooling)Forced air cooling3.6IP degreeIP30, please specify if you require
  • 18V 1500A ac to dc remote control nickel plating power supply
  • Application: Electroplating Efficiency: >85% Control Way: Remote Control Cooling Way: Air Cooling Color: Grey Or Black Type: AC To DC 18V 1500A ac to dc remote control nickel plating power supply18V 1500A ac to dc remote control nickel plating power supply is used to electroplate. But not only for nickel electroplating, but other many applications. Such as zinc, chrome,copper and so on.  Some pics was followed   Application