Home » New Products » Thyristor Rectifier for Chlor Alkali Electrolysis Gold Silver Copper Zinc Lead Electrowinning » Inverter Rectifier
Product List
Rectifier
  • Pulse Electroplating Power Supply
  • This pulse power supply adopts IGBT switch rectifier, PWM chopper technology, DSP microcomputer digital control technology and touch ...
  • SCR Anodizing Power Supply
  • This SCR anodizing power supply adopts thyristor rectifier technology, PLC, DSP microcomputer digital control technology and touch...

Inverter Rectifier

SCR

Thyristor Electroplating Rectifier

  • IGBT Rectifiers For Galvanic
  • TECHNICAL SPECIFICATIONS• Power supply: three-phase 220V/380V/440Vac +/- 10% 50/60 Hz.• Output voltage: 12V.• Output current: 2000A.• Regulation range: from 2 to 100% of output voltage or current.• Voltage ripple: less than 5% over whole regulation range.• Efficiency: ≥93% depending on load factor.• Protection: against short-circuits, phase loss, overtemperature, overvoltage.• Cooling: forced air.• Max. room temperature: 40°C.• Max. humidity: 80%.ADVANTAGES:1. Lower energy consumption.2. Greater penetration.3. IGBT module design.4. Output waveform quality remains CONSTANT even as voltage/c
  • High Power SCR Rectifier Transformer Of MW Class For Electrowinning
  • High power SCR rectifier transformer of MW class for electrowinning 1. Application        A conventional electrowinning unit consists of a tank, rectifier and pump. Cathodes and anodes are aligned inside the tank. The pump fills the tank with electrolytic solution. Electrical current is provided by rectifier to cathodes and anodes in such way that difference in electrical potential creates a movement of cations towards the cathode. As time goes by the positively charged ions will plate on the cathodes. It is important to note that as metal builds-up on th
  • DC Anodizing Power Supply Rectifier 48V 50A High Efficiency Air Cooling
  • Application: Anodizing Efficiency: >85% Control Way: Panel Control Cooling Way: Air Cooling Color: Grey Type: AC To DC 48V 50A high efficiency dc anodizing power supply rectifier 48V 50A high efficiency dc anodizing power supply rectifier is used to anodizing. It's 5th generation high frenquency switching rectifier/power suuply/ Smaller and lighter compared with 4th generation rectifier. Some pics was followed    Appli
  • 1000A 12V High Frequency Plating Rectifier
  • Full Specifications:1000A 12V  Portable  High Frequency Switch Mode  Pulse Rectifier With water cooling for plating is suitable for electrochemistry process, such as electroplating, electrolysis, anodizing, electrowinning, electrorefining etc. to provide stable DC power supply. Working principleThe IGBT switch mode rectifier adopts PWM technology realizing AC-DC conversion, continuously supply DC power for applied load. The rectifier is mainly made up with the following subassemblies:*IGBT inverter H bridge* Diode bridge* High frequency transformer*&
  • 18V 6000A water cooling hard chrome electrolating power supply rectifier
  • Application: Electroplating Efficiency: >85% Control Way: Remote Control Cooling Way: Water Cooling Color: Grey And Black Type: AC To DC 18V 6000A water cooling hard chrome electrolating power supply rectifier 18V 6000A water cooling hard chrome electrolating power supply rectifier is used to electroplating or anodizing. 18V also can be used to electroplate hard chrome. Regarding to anodizing, this unit installed on filters, so ripple is lower than 5%.
  • 48V 100A Titanium Anodizing Power Supply Rectifier Remote Control CE Approved
  • Application: Anodizing Efficiency: >85% Control Way: Remote Control Cooling Way: Air Cooling Color: Black Or Grey Type: AC To DC 48V 100A grey titanium anodizing power supply rectifier 48V 100A grey titanium anodizing power supply rectifier is used to anodizing. Such as sulfuric acid, chromic acid, oxalic acid. It's 5th generation high frenquency switching rectifier/power suuply/ Smaller and lighter compared with 4th generation rectifier
  • 12v 3000A Water Cooling Electrolytic Rectifier With Polarity Reverse High Frequency
  • Input Voltage: 220v /380v/415v/450v Phase: 3 Phase Cooling: Water Cooling Polarity Reverse: Yes Size: 900*620*660mm Weight: 150kg Control: Remote Control With 6 Meter Control Wire Color: Gray 12v 3000a High frequency water cooling electrolytic rectifier with polarity reverse High frequency electrolytic power supply description:1, Can configure a single main cabinet or double main cabinet plus control cabine
  • 18V 3000A PCB Coppper Electroplating Rectifier , PCB Plating Power Supply
  • Application: PCB Electroplating Efficiency: >85% Control Way: Remote Control Cooling Way: Air Cooling Color: Blue And Grey 12V 3000A high frequency copper foil electroplating rectifier  12V 3000A high frequency copper foil electroplating rectifier is used to electroplating copper on PCB. We have many models for electroplating copper. Such as 0~6V, 0~12V,0~18V, 0~3000A. The efficiency can be >85%. Some pics was followed Remote control box Applica